Tub leaning too far forward causing water to spill while filling - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Tub leaning too far forward causing water to spill while filling Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LXR9245EQ1	Brand: Whirlpool	Age: Less than 1 year
Previous Topic Next Topic

DEZB		#1 Posted : Sunday, May 9, 2010 6:54:21 PM(UTC)
Rank: Member Groups: Registered Joined: 5/9/2010(UTC) Posts: 1		Hello, I've already replaced the three leveling springs (#3 on diagram). I must be missing something that pulls the top of the tub to the rear or the bottom to the front. Your help is greatly appreciated! oops! It's probably more than ten years old.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

magician59		#2 Posted : Monday, May 10, 2010 9:56:49 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		There should also be a counter-balance spring to offset the motor weight. It will connect to the rear of the chassis.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close