Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
Whirlpool Dryer Timer Fails to Advance. Heat? Well, sometimes.
Options
Go to last post Go to first unread
Model: LGB6200KQ1 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
Gene  
#11 Posted : Tuesday, April 20, 2010 9:29:30 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Instead of order the coil kit (both coils included) you tried to order each coil separate. Just click on the part number or picture I posted and proceed with your order.

Gene.
Back to top
benw01  
#12 Posted : Sunday, April 25, 2010 6:14:32 AM(UTC)
benw01

Rank: Member

Groups: Registered
Joined: 4/15/2010(UTC)
Posts: 6
I* got it. Thanks.
Back to top
Gene  
#13 Posted : Sunday, April 25, 2010 1:10:24 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
Back to top
benw01  
#14 Posted : Sunday, April 25, 2010 3:01:41 PM(UTC)
benw01

Rank: Member

Groups: Registered
Joined: 4/15/2010(UTC)
Posts: 6
I had problem to reach the Burner Assembly, I have some progress now. I'll keep you posted...

4/28
It was not easy for me to take out the old parts. Anyway, I got them and I am ordering the new parts. Thanks Gene.
Back to top
benw01  
#15 Posted : Monday, May 3, 2010 8:23:08 PM(UTC)
benw01

Rank: Member

Groups: Registered
Joined: 4/15/2010(UTC)
Posts: 6
Gene,

I got the parts as suggested. BTW, shipping was amazingly fast.

I replaced the parts. It definitly fixed one of the two problems I had. Thanks for your advice.

problem 1: No heat supply after 10 minutes of running. Again, this problem is fixed.

problem 2: the Timer knob does NOT advance when it is running in "Drying" cycle. When running in Timer cycle (says 60 mins), it works fine. Again,
when running in Drynig cycle, it would run indefinitely and the dryer would get over heat.

Further advice appreciated.

Thanks,
Ben
Back to top
AlanJ  
#16 Posted : Thursday, January 13, 2011 6:51:17 PM(UTC)
AlanJ

Rank: Member

Groups: Registered
Joined: 1/13/2011(UTC)
Posts: 2
Thanks AppliancePartsPros and contributors for the advice! The coils were exactly the problem why the gas valve wasn't opening and the timer wasn't moving (I would never have guessed). I bought the coil set for my Whirlpool as instructed, which arrived in 2 days, and in less than 20 minutes from start to finish the dryer was back up and running.

Thanks again.
Back to top
Gene  
#17 Posted : Friday, January 14, 2011 3:12:09 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. We are glad you were able to fix it.

Thank you for the feedback.

Gene.
Back to top
Lanz  
#18 Posted : Tuesday, August 2, 2011 8:34:35 PM(UTC)
Lanz

Rank: Member

Groups: Registered
Joined: 8/2/2011(UTC)
Posts: 1
Hello, I have had the same problem with my dryer, a whirlpool model LHI5801W0. Do you know what part I need?
Back to top
Users browsing this topic
Guest (2)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET