Rank: Member
Groups: Registered
Joined: 4/13/2010(UTC) Posts: 4
|
how do i replace the belt on my washer white westinghouse WWX433RBW2 model ?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
You have to remove the front panel in order to access the belt. Unscrew two screws on the bottom of the front panel and slide it down. - The belt Part number: AP3867042
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/13/2010(UTC) Posts: 4
|
the problem I am having is not with removal of panel but it is with the actual belt installation on pulleys, i dont know how the tensioner comes into play with belt install . Originally Posted by: Gene You have to remove the front panel in order to access the belt. Unscrew two screws on the bottom of the front panel and slide it down. - The belt Part number: AP3867042
Gene.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hopefully the attached picture will help. Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/13/2010(UTC) Posts: 4
|
Thanks A Million, They Say A Picture Is Worth A Thousand Words It Help And The Washer Is Working Fine Kelvin Originally Posted by: Kmcduffie the problem I am having is not with removal of panel but it is with the actual belt installation on pulleys, i dont know how the tensioner comes into play with belt install .
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Kelvin,
I'm glad you were able to do it.
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/10/2010(UTC) Posts: 1
|
:confused: I have an older White-Westinghouse washer - Model# LA640JXW3. The washer is not spinning or agitating. I have identified the problem. The pulley wheel is broken and the belt is worn. I went out and purchase a new pulley wheel and belt, but I am having a hard time with the installation of the belt on the pulley. I just cannot get it on there. I tried to put the warn belt back on. I will work for a few moments and fall off. Can anyone give me an idea of what I am doing incorrectly?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/27/2011(UTC) Posts: 1
|
I need to replace washer belt on WHite Westinghouse model LA800M
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/17/2014(UTC) Posts: 2
|
Originally Posted by: Gene You have to remove the front panel in order to access the belt. Unscrew two screws on the bottom of the front panel and slide it down. - The belt Part number: AP3867042
Gene. Would the replacement work and belt be the same for a model MWX413REW1? My belt is screaming on spin cycle now as well. Many thanks Gene!
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close