Rank: Member
Groups: Registered
Joined: 3/7/2010(UTC) Posts: 3
|
I have Kenmore stackable washer/dryer. I have replaced motor and belt but drum will not turn.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
I assume you mean that the machine will not come on at all. Use a meter to make sure you have current to the connection block and that the door switch is ok. Then use it to check out all of the thermal devices. Here is a service manual in case you do not have one. http://frigidaireservicetips.com/pdfs/488_3.pdf
|
|
|
|
Rank: Member
Groups: Registered
Joined: 3/7/2010(UTC) Posts: 3
|
There is electricity to the unit. It seems as though the drum is not level or something and that is why it will not tumble. Could there be a bolt or something broken that holds the drum?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC) Posts: 11,699
|
If you are saying that the motor runs and the dryer heats but the drum does not turn, then take out the drum and check the rear bearing. It may be bad, and sometimes the drum is not properly seated in the slot assembly so check that also.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close