Gas smell under stove - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Gas smell under stove Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FGF350BBWA	Brand: Frigidaire	Age: More than 10 years
Previous Topic Next Topic

dpnj		#1 Posted : Wednesday, March 26, 2008 10:43:42 AM(UTC)
Rank: Member Groups: Registered Joined: 3/26/2008(UTC) Posts: 2		There is a smell of gas under the stove even when everything is turned off. The oven takes a long time to heat up and I have just replaced the igniter (part # AP2150412) and that did not help. I have checked every gas connection with soapy water and have found no leaks. The gas company (propane) also believes the leak to be under the stove. I think it is the safety valve (part # AP2138239) but have read that the valve going bad is a very rare problem. Any suggestions would be welcome.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, March 27, 2008 10:33:40 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Looks like the gas leak you have is very slow which is very hard to detect with soapy water. Guessing is not the best way to fix anything. I would recommend to use the portable gas leak detector to pinpoint the gas leak. Test all connections and gas parts as shown on the break down diagram and post your findings. Gene.


User Profile View All Posts by User View Thanks

dpnj		#3 Posted : Tuesday, April 1, 2008 5:51:56 PM(UTC)
Rank: Member Groups: Registered Joined: 3/26/2008(UTC) Posts: 2		After using the gas leak indicater, I located a VERY SLOW leak on the top of the dual gas safety valve where it enters the oven burner. I tried to tighten the nut on it but it is still leaking. I don't know if I can unscrew the piece off of the top and reset it with teflon tape, I don't know that I would want to. Should I now replace the dual gas safety valve?


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Tuesday, April 1, 2008 6:36:04 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Yes, this is the best solution. - The part number for the dual gas safety valve is AP2138239 Here is the break down diagrams for the Frigidaire range Model FGF350BBWA Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close