Help with Whirlpool Side exhaust vent - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Help with Whirlpool Side exhaust vent Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LTE6234DT2	Brand: Whirlpool	Age: Less than 1 year
Previous Topic Next Topic

tracerbulletprivateye		#1 Posted : Monday, August 27, 2007 10:18:09 AM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2007(UTC) Posts: 1		We have a very small recess so I want to install a side exhaust kit on a Whirlpool stackable washer and dryer. The instructions say to just drill 4 1/4" holes at the dimples, at 12, 3, 6, and 9 o'clock. I did so, and the instructions say you may need to knock it out with a hammer. I've nailed it hard, and it still won't budge. Any help getting the knockout panel out? Is there a special trick?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Admin / APP Team		#2 Posted : Tuesday, August 28, 2007 8:57:34 AM(UTC)
Rank: Administration Groups: Registered Joined: 7/18/2007(UTC) Posts: 799 Was thanked: 1 time(s) in 1 post(s)		That's odd. No special trick, really. Those 4 weld spots are all that's holding the panel to the cabinet.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close