Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
kazual90  
#1 Posted : Monday, February 1, 2010 4:53:31 AM(UTC)
kazual90

Rank: Member

Groups: Registered
Joined: 2/1/2010(UTC)
Posts: 3

Yesterday, we lost power to the house for a few hours. Last night we went to start the dishwasher and only the hot dry and hot water dishes lights were on AND blinking. when we closed the dishwasher, it 'ran' but with no water and still blinking lights. Very frustrating. I have held down ALL BUTTONS for at least 3 seconds to lock or unlock and nothing changes...it was fine the day before the power loss. ANY suggestions??

thanks
Linda
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kazual90  
#2 Posted : Tuesday, February 2, 2010 8:17:58 AM(UTC)
kazual90

Rank: Member

Groups: Registered
Joined: 2/1/2010(UTC)
Posts: 3

should we just let it run it's course? i'm afraid that we'll burn the motor
solley  
#3 Posted : Friday, September 16, 2011 4:28:38 AM(UTC)
solley

Rank: Member

Groups: Registered
Joined: 9/16/2011(UTC)
Posts: 2

Did you ever figure anything out. Ours just started similar symptoms today. Would love to hear if you solved it.
kazual90  
#4 Posted : Friday, September 16, 2011 4:45:45 AM(UTC)
kazual90

Rank: Member

Groups: Registered
Joined: 2/1/2010(UTC)
Posts: 3

Hi. Wow, forgot about that. I sat there for a while holding down the start and 'normal cycle' button, I THINK. I have to find the manual because i believe that i wrote down what i did on there. I will set a tickler for this to reply later
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.