Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Ice Dispenser Freezes Up
Options
Go to last post Go to first unread
Model: KSRS2506WH01 Brand: Kitchen Aid Age: 1 - 5 years
Previous Topic Next Topic
tsmendenhall  
#1 Posted : Monday, March 24, 2008 7:42:27 AM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
The ice dispenser in the front of the ice ben, and the shoot on the freezer door continue to "freeze up" so the ice cannot be dispensed.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
tsmendenhall  
#2 Posted : Tuesday, April 1, 2008 4:58:03 PM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
No one has an answer to this one?
Back to top
tsmendenhall  
#3 Posted : Friday, April 4, 2008 5:05:51 AM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
The ice dispenser has to be defrosted once a week. And ice accumulates in the freezer door shoot.
Back to top
tsmendenhall  
#4 Posted : Saturday, April 12, 2008 1:01:50 PM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
I am trying to keep this active. Does any one have a solution for the problem?
Back to top
gearhead1218  
#5 Posted : Sunday, April 13, 2008 9:14:59 AM(UTC)
gearhead1218

Rank: Member

Groups: Registered
Joined: 4/7/2008(UTC)
Posts: 62
Most likely you need to replace the flapper for the chute. Sounds like it's not sealing to the frame properly and letting air in and causing the frost-up problem.
A common problem and not an expensive repair. The part has also been improved from the original.
Back to top
tsmendenhall  
#6 Posted : Sunday, April 13, 2008 12:47:13 PM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
Thank you for the reply. The model number of the Kitchen Aid

Model Number: KSRS2506WH01
Brand: Kitchen Aid

Is not listed in the index. How do I get a part number for the ice maker shoot flapper?
Back to top
gearhead1218  
#7 Posted : Sunday, April 13, 2008 4:17:56 PM(UTC)
gearhead1218

Rank: Member

Groups: Registered
Joined: 4/7/2008(UTC)
Posts: 62
Where are you getting your model #?
You should be taking it off the data plate located in the fresh food compartment.
Back to top
tsmendenhall  
#8 Posted : Monday, April 14, 2008 7:05:55 AM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
The Kitchen Aid model number seems to be KSRS25OGWH01

The serial number is: SH37339603

Purchased in 09/98

Thanks
Back to top
gearhead1218  
#9 Posted : Monday, April 14, 2008 12:50:45 PM(UTC)
gearhead1218

Rank: Member

Groups: Registered
Joined: 4/7/2008(UTC)
Posts: 62
Part you're looking for is; AP3595356

I believe your correct model # is KSRS25QGWHO1
Back to top
tsmendenhall  
#10 Posted : Thursday, April 17, 2008 6:20:10 AM(UTC)
tsmendenhall

Rank: Member

Groups: Registered
Joined: 3/24/2008(UTC)
Posts: 7
Thank you for your help. The part seems to be working fine. One question: The older flap had a heater with it. The new one does not. Is that problem?

Thanks again!
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Side by Side's Ice Dispenser freezes up solid (Refrigerator & Freezer Repair)
by huberhouse1886 8/1/2008 12:14:52 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET