Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Noisy during initial pump out with no spin
Options
Go to last post Go to first unread
Model: WTW5520SQ Brand: Whirlpool Age: Less than 1 year
Previous Topic Next Topic
GeorgeG  
#1 Posted : Monday, March 10, 2008 7:53:04 PM(UTC)
GeorgeG

Rank: Member

Groups: Registered
Joined: 1/19/2008(UTC)
Posts: 45
When this machine first goes into the pump out (drain) mode with the transmission idle the machine is very noisy, like a grinding noise. When the transmission engages after the power interuption, the spin and pump noise combination is dramatically reduced. Is this a bum transmission while in the "neutral" mode?

Thanks,

George
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Matt S  
#2 Posted : Tuesday, March 11, 2008 2:13:07 PM(UTC)
Matt S

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/11/2008(UTC)
Posts: 66
It may be. Since your machine is less than one year old, call Whirlpool (800-hiroper) and setup a service call.

Matt
Back to top
GeorgeG  
#3 Posted : Wednesday, March 12, 2008 9:23:54 AM(UTC)
GeorgeG

Rank: Member

Groups: Registered
Joined: 1/19/2008(UTC)
Posts: 45
I'll be fixing the unit myself. Any insight is appreciated.

Thanks,

George
Back to top
Matt S  
#4 Posted : Wednesday, March 12, 2008 2:01:43 PM(UTC)
Matt S

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/11/2008(UTC)
Posts: 66
It sounds like your transmission is bad. Why would you not call Whirlpool? A transmission is very expensive.
Back to top
GeorgeG  
#5 Posted : Friday, March 21, 2008 7:01:01 PM(UTC)
GeorgeG

Rank: Member

Groups: Registered
Joined: 1/19/2008(UTC)
Posts: 45
I had a chance to listen to an identical machine and it sounds the same. Must be the design.

George
Back to top
bambiblaster  
#6 Posted : Saturday, March 22, 2008 4:23:17 AM(UTC)
bambiblaster

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/4/2008(UTC)
Posts: 116
Its normal sounds.. units these days are made of thinner metal and vibrations are louder...
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET