HELP!? Whirlpool stackable will not go into spin cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

HELP!? Whirlpool stackable will not go into spin cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LHW0050PQ	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

cryan		#1 Posted : Sunday, December 27, 2009 7:34:17 AM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2009(UTC) Posts: 2		This front load stackable will not go into spin cycle. I took it apart...the belt is fine, actually the entire unit looks new inside. The hoses and filters are clean, it will spin real slow on spin mode , but acts like it is in wash. Rotates slow back and forth...will NOT spin out like it should.. I was told to look into getting a new control panel and it is priced at $418.31 !!!!!!!!!!!!! :confused: If anyone has a better / cheaper idea of a diognosis for this PLEASE tell me. I will not buy this part, the washer will end up as scrap, and I'll need to find a used washer! THANKS!!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Sunday, December 27, 2009 10:55:20 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		I have only worked on one of these, not very impressed with it. The service manual is of limited help, basically a "replace the board and see if that fixes it" procedure. Here is the service manual. See if you can put the machine into diagnosis mode and also check key components like the door switch but I am afraid the likely solution will be a control board replacement. I agree that you should replace it if you cannot find an inexpensive fix. I strongly recommend a no frills, top loading machine with no microoprocessor controls, for reasons you are now familiar with. https://secured.whirlpoo...9b84/$FILE/WPWASHER1.pdf


User Profile View All Posts by User View Thanks

cryan		#3 Posted : Monday, December 28, 2009 9:43:47 AM(UTC)
Rank: Member Groups: Registered Joined: 12/27/2009(UTC) Posts: 2		Originally Posted by: sidfink43 I have only worked on one of these, not very impressed with it. The service manual is of limited help, basically a "replace the board and see if that fixes it" procedure. Here is the service manual. See if you can put the machine into diagnosis mode and also check key components like the door switch but I am afraid the likely solution will be a control board replacement. I agree that you should replace it if you cannot find an inexpensive fix. I strongly recommend a no frills, top loading machine with no microoprocessor controls, for reasons you are now familiar with. https://secured.whirlpoo...9b84/$FILE/WPWASHER1.pdf Thanks soooo much for your reply and of course help. I will look through the manual and try to get it into diognose mode ...just to be sure, but I'm guessing that you helped in my decision....yes, a no frills top loader! *This one came with my little mobile home. I would have never purchased it myself!!* *Thanks again and I'll fill you in if a miricle happens (cheap part) Ha Ha... no such luck?*


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close