Kitchen Aid Dishwasher KUDK01ILBS3 no power to Control Panel - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kitchen Aid Dishwasher KUDK01ILBS3 no power to Control Panel Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDK01ILBS3	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

saint01		#1 Posted : Tuesday, December 8, 2009 4:08:34 PM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2009(UTC) Posts: 3		I have owned this Kitchen Aid for about 5 years now. I really hate to replace it, because it matches all of my appliances and has been working fine. Suddenly, a few days ago, the control panel just stopped working. What I mean by this is that the control panel is not responding to any buttons that are depressed. I'm not sure that it is the control panel for sure, as this is the only information I have (I'm not a dishwasher mechanic but am very handy). If someone can help me troubleshoot this issue, that would be awesome!!! I hate to buy a new one or pay someone a few hundred bucks when I can probably fix the problem myself. thanks, Jeff


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, December 8, 2009 4:38:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL KUDK01ILBS3 Undercounter Dishwasher \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/d...0Sheet%20-%208537797.pdf If unit is totally dead check Item 6 in Section 2 with a meter. If blown be sure to use the new wiring harness when replacing it.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

saint01		#3 Posted : Tuesday, December 8, 2009 4:40:04 PM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2009(UTC) Posts: 3		thank you. If you were looking at this, would you start with the meter? I have a feeling that it is related to the control panel. Maybe that is wishful thinking, but just not sure where to start here. Any advice is much appreciated. Thank you for your response so far!


User Profile View All Posts by User View Thanks

denman		#4 Posted : Tuesday, December 8, 2009 5:50:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		When I look at a dead unit I always check the power at the plug. Then at the machine re: wire nuts or where ever the line cord attaches to the actual unit's wiring. Then on this unit I would check the thermal fuse. It is not uncommon for these fuses to blow as you can see they have come up with a kit to help alleviate this.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

saint01		#5 Posted : Wednesday, December 9, 2009 3:27:02 AM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2009(UTC) Posts: 3		thank you very much. I really appreciate it.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close