dishwasher impeller installation - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

dishwasher impeller installation Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GU1100XTLQ1	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

timoteo		#1 Posted : Wednesday, February 20, 2008 11:49:04 AM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2008(UTC) Posts: 3		Can the impeller kit assembly be installed from the interior of the dishwasher, or do I need to pull it from under the counter for this part's removal and replacement? I previously removed and replaced chopper assy which did not eliminate noise during wash cycle (no noise during draining). Are there any other seals besides those in the impeller kit assy recommended if replacing this item?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, February 21, 2008 10:39:00 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi timoteo, In order to rebuild the pump the dishwasher has to be removed from the cabinet. You can find the complete instructions in the tech sheets. Besides the impeller kit you have to order the volute seal. - The part number for the impeller kit is AP3738238 - The part number for the volute seal is AP3039198 Here are the break down diagrams for the Whirlpool dishwasher Model GU1100XTLQ1 Gene.


User Profile View All Posts by User View Thanks

timoteo		#3 Posted : Friday, February 22, 2008 9:18:32 AM(UTC)
Rank: Member Groups: Registered Joined: 2/5/2008(UTC) Posts: 3		Thanks Gene for the info. Ordering recommended seal and then will install impeller kit. If that doesn't fix noise, probably motor seal/bearing may be source. Dishwasher is 6 years old, would you recommend motor replacement or complete motor-pump assy replacement in that event. tim johnson (fellow fisherman)


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Friday, February 22, 2008 1:14:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi Tim, I can not believe it but the motor assembly cost less than the motor itself. So, if the noise caused by the motor bearing I would buy the motor assembly. Definitely you do not need the pump housing in any way. - The part number for the motor assembly is AP3179651 - The part number for the motor is AP3799654 Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close