Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Gordon Emberley  
#1 Posted : Friday, February 8, 2008 2:30:22 PM(UTC)
Gordon Emberley

Rank: Member

Groups: Registered
Joined: 2/8/2008(UTC)
Posts: 2

The top oven will not self clean , but the bottom oven will. The top latch is no op and the bottom one works...the lights /door "closed" switches both work.

All roads lead to the top power door latch. Any input about how to go about replacement will be appreciated as it will not come out through the front and I am guessing that the whole double oven must come out ...Like having to pull an engine to change a spark plug :(

Thanks Gordon Emberley
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
GrandpaD  
#2 Posted : Saturday, February 16, 2008 12:57:55 PM(UTC)
GrandpaD

Rank: Member

Groups: Registered
Joined: 2/16/2008(UTC)
Posts: 2

I have similar problem. I just finished working with mine. Some screws will need drilling out because too tight. Tried WD40. Lock light does not come on and motor latch does not operate. Pulled oven halfway out. Not worth the trouble. Latch cost over $100. Will probably replace whole double over. Over 10 years old.
Gordon Emberley  
#3 Posted : Saturday, February 16, 2008 2:28:06 PM(UTC)
Gordon Emberley

Rank: Member

Groups: Registered
Joined: 2/8/2008(UTC)
Posts: 2

I am also fed up with the (pricey) Termadore/Bosch run around, though now committed to having a service person comming for a "flat fee" of $178
to install the part that I already have. I tried to install myself and noticed right off that it was very different in size and configuration and would not fit the original mounting holes and also had to be completely rewired ad the new one has an extra switch...I'd call that a "manufacturer's defect", if a replacement part must be retrofitted and I never got so far as to find that the screws were heat welded to the frame as you did...seems to me that the "self cleaning" just cooks the motorized latch...Can't wait till the bottom oven also gives up....Kind regards, Gordon Emberley
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.