Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
HDIronman  
#1 Posted : Tuesday, November 10, 2009 2:00:24 PM(UTC)
HDIronman

Rank: Member

Groups: Registered
Joined: 10/25/2009(UTC)
Posts: 2

So, dryer tumbles but does not heat. I thought it was the coils so I replaced them, and still no luck. Igniter would not glow, so I replaced as well. Still no heat.

So then I disconnected the wires from the flame sensor and jumped them together, and the igniter did glow. But still no flame. Am I correct in thinking the problem is the flame sensor, or could it still be another component...?

(I'm wearing wet clothes)
Phillip
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
HDIronman  
#2 Posted : Wednesday, November 18, 2009 3:45:56 AM(UTC)
HDIronman

Rank: Member

Groups: Registered
Joined: 10/25/2009(UTC)
Posts: 2

ttt.............anyone?
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.