Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

10 Pages123>»
New Topic Post Reply
Options
Go to last post Go to first unread
sharzaz  
#1 Posted : Thursday, February 7, 2008 3:57:25 PM(UTC)
Quote
sharzaz

Rank: Member

Groups: Registered
Joined: 2/3/2008(UTC)
Posts: 5

Several days after clean mode both, bake and broil element don't heat. Power is good to poles on the back. Elements read about .13 ohms but no juice when controls are on and testing for 240v touching element connections,one probe on each side. Is there an in-line fuse ? What does it look like ? Can I find a schematic somewhere on the net ? Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, February 7, 2008 4:36:17 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad Electronic Oven Control (EOC) which has to be replaced.

- The part number for the EOC is AP3215567

Gene.
sharzaz  
#3 Posted : Friday, February 8, 2008 1:17:23 PM(UTC)
Quote
sharzaz

Rank: Member

Groups: Registered
Joined: 2/3/2008(UTC)
Posts: 5

The temperture display work as does the convection fan, heat display for broil or bake elements. Is there an in line fuse ?
Gene  
#4 Posted : Friday, February 8, 2008 1:21:51 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
There are no fuses and the problem has nothing to do with the display.

There are a few relays in the EOC that supply power to the heating elements.

Gene.
sharzaz  
#5 Posted : Friday, February 8, 2008 2:56:22 PM(UTC)
Quote
sharzaz

Rank: Member

Groups: Registered
Joined: 2/3/2008(UTC)
Posts: 5

Can the relays be replaced or is the only option is to spend $200 on the EOC?
Gene  
#6 Posted : Friday, February 8, 2008 3:24:30 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If there would be any options I will let you know, but not in this case.

Gene.
sharzaz  
#7 Posted : Saturday, February 9, 2008 2:56:34 PM(UTC)
Quote
sharzaz

Rank: Member

Groups: Registered
Joined: 2/3/2008(UTC)
Posts: 5

The wife happened to try the preheat (400) and the top element heated to maybe 250. does this confirm the EOC's kaput? Thanks for the help and patients!
Gene  
#8 Posted : Saturday, February 9, 2008 3:07:40 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
If there is the right power to the unit - most likely the problem caused by the EOC.

Gene.
paulos  
#9 Posted : Sunday, November 2, 2008 7:29:25 PM(UTC)
Quote
paulos

Rank: Member

Groups: Registered
Joined: 11/2/2008(UTC)
Posts: 1

I just bought a used Frigidaire electric oven (white). When I plugged it in the clock worked then it conked out. Also the stove elements wont get red hot - my eggs took about 8 minutes to cook and even then they were runny.

I looked at the fuse, it is 15 A - could this be too low? I am not sure what an EOC is, but if it's 200 and I just spent 90 for the oven itself, I dont wanna get one!

TY
Gene  
#10 Posted : Monday, November 3, 2008 12:00:58 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the complete model number of the range?

If this range is electric then there are suppose to be 240 volts outlet for the range and a double circuit breaker (at least 30 amps each) in the breaker box.

Gene.
Quick Reply Show Quick Reply
Users browsing this topic
10 Pages123>»
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.