Rank: Member
Groups: Registered
Joined: 10/5/2009(UTC)
Posts: 2
|
Despite cleaning the lint filter and the heat exchanger, following the instructions in the manual, and cleaning all the lint out of all the nooks and crannies I can find, plus mopping up any water found within the appliance we are getting the "Clean the Lint Filter" indicator within minutes of starting the dryer. Am I missing a sensor or do I have a failing sensor? I have also ensured that the air inlet is not blocked as the manual suggests.
I would greatly appreciate any help you can give.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
I am afraid those of us who reply on this Forum are not really familiar with this brand, so I am going to suggest you post on another Forum and see if you can get someone to help you.
Sorry we could not be more helpful. Good luck
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/5/2009(UTC)
Posts: 2
|
Originally Posted by: sidfink43  I am afraid those of us who reply on this Forum are not really familiar with this brand, so I am going to suggest you post on another Forum and see if you can get someone to help you.
Sorry we could not be more helpful. Good luck Thanks for your quick answer.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
