Detergent door not opening - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Detergent door not opening Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUPD01ILBL3	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

HoosierDaddy		#1 Posted : Monday, September 28, 2009 5:36:13 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2009(UTC) Posts: 2		After 6 years of flawless operation, our KitchenAid dishwasher's degergent door stopped opening this weekend. I checked for anything simple like a stickly door release latch, lumpy dishwasher soap. That doesn't seem to be the problem. I am guessing a faulty dispenser door solenoid but before I start taking the thing apart, I and asking the forum for the most likely failures with this type of problem. Any and all info and experiences are really appreciated. I'd rather learn from your experiences rather than me stumble down the wrong path and make things worse. ARGH! This is my first post and I got the model number wrong and can't figure out how to edit the model number. IT is model KUDP01ILBL3 (I transposed the D and P on the original info. Sorry for the error.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Monday, September 28, 2009 6:20:07 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Tub and frame parts replacement parts for WHIRLPOOL KUDP01ILBL3 \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/d...0Sheet%20-%208537797.pdf And here is a manual for units close to yours https://secured.whirlpoo...800643b6d/$FILE/KD01.pdf Try to run the diags to see if it opens. Remove the doors inner cover. Check to see if dispenser door will open mechanically. Check that the solenoid has continuity (300 ohms approximately). Check that the wiring from the control board to the dispenser is OK.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

HoosierDaddy		#3 Posted : Wednesday, September 30, 2009 10:52:59 AM(UTC)
Rank: Member Groups: Registered Joined: 9/28/2009(UTC) Posts: 2		Thank you Denman! The info you sent was perfect and really help.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close