Electric Kenmore Dryer not heating Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 110.62722100	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

morenojx		#1 Posted : Wednesday, September 2, 2009 7:32:58 AM(UTC)
Rank: Member Groups: Registered Joined: 1/6/2009(UTC) Posts: 11		My Kenmore electric dryer is turning and blowing air, but the air is not hot. I ran it with the door open and I see no glow. What should I be checking for first?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Wednesday, September 2, 2009 11:00:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The first thing I would do is check for 240 VAC at the wall outlet. The heating element needs 240 volts while the motor will run with 120 volts. If there is nothing wrong then perform the troubleshooting, using the instructions from one of our previous posts: http://forum.appliancepartspros...timer-wont-turn-off.html Post the results of the troubleshooting. Gene.
User Profile View All Posts by User View Thanks

watchman		#3 Posted : Thursday, September 3, 2009 9:58:17 AM(UTC)
Rank: Member Groups: Registered Joined: 9/2/2009(UTC) Posts: 4		my guess is thermal fuse or high heat fuse, check for continuity to tell which.
User Profile View All Posts by User View Thanks

morenojx		#4 Posted : Thursday, September 3, 2009 10:25:08 AM(UTC)
Rank: Member Groups: Registered Joined: 1/6/2009(UTC) Posts: 11		I will check continuity on both (thermal fuse and high heat fuse) and will post my findings. Thanks!!!
User Profile View All Posts by User View Thanks

Gene		#5 Posted : Thursday, September 3, 2009 2:11:04 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: watchman my guess is thermal fuse or high heat fuse, check for continuity to tell which. The thermal fuse in electric dryer is in the motor circuit. If this fuse is open then the dryer would not do anything. Gene.
User Profile View All Posts by User View Thanks

morenojx		#6 Posted : Tuesday, September 8, 2009 9:27:02 AM(UTC)
Rank: Member Groups: Registered Joined: 1/6/2009(UTC) Posts: 11		Hi, the Thermal fuse read 0.7, high limit thermostat read 0.7, heating element 10.1, there was no reading in the thermal cutoff and no reading on two of the fourcontacts in the cycling thermostat. Does this mean that the thermal cutoff and cycling thermostat are NO GOOD?
User Profile View All Posts by User View Thanks

morenojx		#7 Posted : Wednesday, September 16, 2009 8:39:30 AM(UTC)
Rank: Member Groups: Registered Joined: 1/6/2009(UTC) Posts: 11		Replaced the thermal cutoff and high heat fuse (came together in a kit). It works now. Thank you all for your help.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Wednesday, September 16, 2009 2:22:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. We are glad you were able to fix it. Thank you for the feedback and good luck with your dryer. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)