Rank: Member
Groups: Registered
Joined: 1/24/2008(UTC)
Posts: 2
|
I recently diagnosed my check switch was bad and so now I am just curious. I don't see anywhere on the schematic where there is a system to detect out of balance, except maybe the 'cent sw.' on the motor, but this appears to be more about starting the motor than detection balance. So...what part is responsibly for detecting out of balance condition? I have 2 switches in my lid switch assembly and if it is in one of those switches, which one is it? Enquiring minds want to know...
thanks!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323
|
that larger "cherry" switch is the "out of balance" switch ... that's it ... the micro switch is for another purpose.. always replace complete lid switch kit ( whenever either fail )
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/24/2008(UTC)
Posts: 2
|
Originally Posted by: kawfeeman  that larger "cherry" switch is the "out of balance" switch ... that's it ... the micro switch is for another purpose.. always replace complete lid switch kit ( whenever either fail ) Many thanks, just the info I needed!:)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
