I NEED HELP whith rifrigerrator - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

I NEED HELP whith rifrigerrator Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MFI 2568 AEW	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

godzina		#1 Posted : Friday, September 11, 2009 8:03:44 AM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 4		Hello my is name joel I have 06 maytag refrigerator. My maytag is acting up. the control pannel lights are blinking and the ice dispenser is flapping. I replace the main circuit pannel and flapping stoped. but now the pannel is flashing a code PEO 000 and it dose not let me program anthing on control pannel. what should i do now?:confused:


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Friday, September 11, 2009 8:40:42 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here is the tech sheet http://www.servicematters.com/d...Sheet%20-%2012827965.pdf Perhaps all it needs is setting up.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

godzina		#3 Posted : Monday, September 14, 2009 7:26:43 AM(UTC)
Rank: Member Groups: Registered Joined: 9/8/2009(UTC) Posts: 4		Originally Posted by: godzina Hello my is name joel I have 06 maytag refrigerator. My maytag is acting up. the control pannel lights are blinking and the ice dispenser is flapping. I replace the main circuit pannel and flapping stoped. but now the pannel is flashing a code PEO 000 and it dose not let me program anthing on control pannel. what should i do now?:confused: hello denman, i did as you suggest but the pannel still blinks with PE on the freezer side and 0000 on the refridgerator side and will not let us prograhm at all. what do you think now? thank you for your time. joel


User Profile View All Posts by User View Thanks

denman		#4 Posted : Tuesday, September 15, 2009 2:41:55 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here is a service manual http://www.servicematters.com/m...ibrary/docs/16026312.pdf Here is an earlier tech sheet http://www.servicematters.com/m...ibrary/docs/16026830.pdf PE does indicate that you are stuck in programming mode. I would disconnect/reconnect the keypad perhaps it is just a bad connection. Try to run the diagnostics. Since you cannot program the unit it could be that the keypad is toast. Cannot find info on how to definitively diagnose the keypad so it is a guess. There is always a possibility that you have a received a bad control board. Hopefully someone else will jump in with additional help.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close