Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
benofjoy  
#1 Posted : Friday, September 11, 2009 11:19:25 AM(UTC)
benofjoy

Rank: Member

Groups: Registered
Joined: 9/11/2009(UTC)
Posts: 2

Hi,
I'm trying to replace my refrigerator's thermostat. My refrigerator is a top and bottom Admiral.

Can you please advise if the male connector on my thermostat (Item 1 in picture 2) should connect to B or C (picture 1)?
Likewise, should the female connector on my thermostat (Item 2 in picture2) be connected to A or D (picture 1)?

Picture1: http://refrigeratorthermo.shutterfly.com/27
Picture2: http://refrigeratorthermo.shutterfly.com/28


Thank you very much
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Saturday, September 12, 2009 6:12:10 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Cannot find any info on this unit, so the below is a guess. I am assuming that D and A go to the defrost heater.

Looks like CD are too short to fit together so I would say that it should between them.

Be sure to tape the one side that will not have an insulating sheath up tightly.
Might also be a good idea to give it a coating of silicone sealant once you confirm the unit is operating correctly. I would also twist tie it or use a zip tie to hold it up where it is less likely to get ice or water.

In any case the defrost thermostat will do it's job as long as it is wired in series with the heater.
THIS FORUM IS DEAD!!!!!!!
benofjoy  
#3 Posted : Saturday, September 12, 2009 7:29:59 AM(UTC)
benofjoy

Rank: Member

Groups: Registered
Joined: 9/11/2009(UTC)
Posts: 2

Hi Denman,
You mean A and B should be connected together. The thermostat should go between C and D. Correct?
Thank you
denman  
#4 Posted : Saturday, September 12, 2009 8:17:11 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Yes that is where I would put it.
THIS FORUM IS DEAD!!!!!!!
Eddie365  
#5 Posted : Saturday, September 12, 2009 7:02:58 PM(UTC)
Eddie365

Rank: Member

Groups: Registered
Joined: 12/1/2008(UTC)
Posts: 48

Connect A-B

Connect Defrost T-stat between C-D and then Clip it into the coil that is on the right.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.