Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
pbaroco  
#1 Posted : Monday, August 24, 2009 5:35:29 AM(UTC)
pbaroco

Rank: Member

Groups: Registered
Joined: 8/24/2009(UTC)
Posts: 2

Dishwasher operates fine and totally drains when going through its cycle. However, by morning it has water in it--sometimes enough that it has leaked out onto the floor.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Frank / APP Team  
#2 Posted : Monday, August 24, 2009 6:37:30 AM(UTC)
Frank / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 8/5/2009(UTC)
Posts: 393

Originally Posted by: pbaroco Go to Quoted Post
Dishwasher operates fine and totally drains when going through its cycle. However, by morning it has water in it--sometimes enough that it has leaked out onto the floor.




If it's clean water, you've got a bad water valve. If it's waste water it's backing up from your sink drain or house plumbing. If you had a model # I'd get you a part #.
naina  
#3 Posted : Monday, August 24, 2009 1:37:20 PM(UTC)
naina

Rank: Member

Groups: Registered
Joined: 8/24/2009(UTC)
Posts: 1

I have the same problem! The water is dirty and seems to be coming from the sink . Everytime I do dishes in the sink the water level in the dishwasher rises after a little while. I'm not 100% sure though! Its a kitchen aid dishwasher with model no KUDK03FTSS2. How do I know that's not a plumbing problem?Please help!!
pbaroco  
#4 Posted : Wednesday, August 26, 2009 5:45:43 PM(UTC)
pbaroco

Rank: Member

Groups: Registered
Joined: 8/24/2009(UTC)
Posts: 2

Frank: Thanks for reply. The water seeping into the dishwater is clear and appears to be a leak vs. backup. The dishwasher is a Kenmore Elite, Model #v665.17263401. Is replacement of the valve a major project or something one could try on his own? Pbaroco
Frank / APP Team  
#5 Posted : Thursday, August 27, 2009 4:09:02 AM(UTC)
Frank / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 8/5/2009(UTC)
Posts: 393

Originally Posted by: pbaroco Go to Quoted Post
Frank: Thanks for reply. The water seeping into the dishwater is clear and appears to be a leak vs. backup. The dishwasher is a Kenmore Elite, Model #v665.17263401. Is replacement of the valve a major project or something one could try on his own? Pbaroco



Not a tough job. Need to kill power to the unit, turn off the water supply, remove the bottom access panel and you'll see the water valve. It'll be the piece that has a couple of wires going to it along with the water supply line. Below is the pt# with picture..

Part number: 8531671
sstroman@comporium.net  
#6 Posted : Saturday, January 10, 2015 6:48:42 AM(UTC)
sstroman@comporium.net

Rank: Member

Groups: Registered
Joined: 1/10/2015(UTC)
Posts: 3

its clean water model # is 587-1651590
sstroman@comporium.net  
#7 Posted : Saturday, January 10, 2015 6:51:33 AM(UTC)
sstroman@comporium.net

Rank: Member

Groups: Registered
Joined: 1/10/2015(UTC)
Posts: 3

this is Awesome , thank you will try this !!!!!!!
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.