Rank: Member
Groups: Registered
Joined: 8/25/2009(UTC)
Posts: 2
|
The gas valve is opening & heating for approx 10 minutes then shuts off. I took apart & cleaned the vent line. What are the most common parts for this repair.
Thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 8/5/2009(UTC)
Posts: 393
|
Originally Posted by: Bigt29  The gas valve is opening & heating for approx 10 minutes then shuts off. I took apart & cleaned the vent line. What are the most common parts for this repair.
Thanks Thermostats or coils on the valve are fairly common. Can you provide any more detail. What happens after the 10 min? Ignitor come back on? How do you get it to start heating again?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/25/2009(UTC)
Posts: 2
|
Frank. After 10 min. I open the door/shut the door & am able to restart the cycle again. Valve opens - have ignition & then shuts down after a few minutes
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 8/5/2009(UTC)
Posts: 393
|
Originally Posted by: Bigt29 Frank. After 10 min. I open the door/shut the door & am able to restart the cycle again. Valve opens - have ignition & then shuts down after a few minutes Just to make sure I'm understanding, the dryer shuts off, or just the flame? The flame is going to cycle, how often will depend on the load. If the flame isn't coming back on but the ignitor does then I would suspect the coils on the gas valve.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
