Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

2 Pages12>
New Topic Post Reply
Options
Go to last post Go to first unread
alan93  
#1 Posted : Friday, August 21, 2009 6:43:44 PM(UTC)
Quote
alan93

Rank: Member

Groups: Registered
Joined: 1/12/2009(UTC)
Posts: 20

8 years old.
I tried to clean coils but can only get to front ones, there are more behind but cant even get to those from back. It's like it needs to be tipped over??

Anyways it will click sometimes but then stops. So does that mean compressor is going bad? (its hot) or relay?
It will click twice 10 seconds apart then do that again in 3 minutes.

fridge and freezer are right temps.

Ordered relay but it wont get here until monday and not even sure i know what to do to replace it. THeres a light colored circuit box on side of compressor.

blue and white wire to compressor
red and white away from circuit to top of fridge.
green for ground.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Saturday, August 22, 2009 2:43:51 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If you ordered the factory service part, it's an easy job, just unplug and and plug in new; wire it per the old device.
Karpentor  
#3 Posted : Saturday, August 22, 2009 4:43:02 AM(UTC)
Quote
Karpentor

Rank: Member

Groups: Registered
Joined: 8/17/2009(UTC)
Posts: 8

Sounds like you have a bad overload relay.
Had any sudden power outs lately?


The box beside the compressor is where the relay is sitting.

The reason the compressor is hot, because the relay is trying to turn the motor on.

When you remove the relay sometimes it is quite evident that it has failed (burn marks, broken contactors etc..)

Good Luck!
alan93  
#4 Posted : Saturday, August 22, 2009 5:24:28 AM(UTC)
Quote
alan93

Rank: Member

Groups: Registered
Joined: 1/12/2009(UTC)
Posts: 20

thanks, hopefully I got the right thing to fix this.

AP3083556 (4387835)Relay, overload and cover kit

Here's a pic of compressor, it the relay the thing on the side?
If its something else behind there I'm not sure how i can get to it past all the copper tubing.

One other note, yes we've had lots of outages this summer it seems.
It does not click all the time , sometimes the compressor runs fine but other times it seems to click when it starts. Hope compressor doesnt go bad before fixed.

Any idea on how to clean those coils when I can't even get vacume back there?
File Attachment(s):
compressor1.jpg (319kb) downloaded 102 time(s).
richappy  
#5 Posted : Saturday, August 22, 2009 5:31:09 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Also, check your compressor to see if it's overheating, could be something else going bad.
alan93  
#6 Posted : Saturday, August 22, 2009 5:32:27 AM(UTC)
Quote
alan93

Rank: Member

Groups: Registered
Joined: 1/12/2009(UTC)
Posts: 20

yea compressor is too hot to touch.
And how do you get the relay cover off/apart?
richappy  
#7 Posted : Saturday, August 22, 2009 7:32:11 AM(UTC)
Quote
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
You pry off the cover if it has no wire retainer.
Karpentor  
#8 Posted : Sunday, August 23, 2009 8:03:44 AM(UTC)
Quote
Karpentor

Rank: Member

Groups: Registered
Joined: 8/17/2009(UTC)
Posts: 8

Use a shopvac (if you have one) connect the hose to the other end and use the vac as a blower. You need to blow out the dirt, I usually use compressed air to gently move the dust away from the compressor and collect it on the front side.:D
MJ DuctPro  
#9 Posted : Sunday, August 23, 2009 9:52:06 AM(UTC)
Quote
MJ DuctPro

Rank: Member

Groups: Registered
Joined: 8/23/2009(UTC)
Posts: 2

I'm not an appliance guy- I clean HVAC systems. I can tell you with certainty that any system that relys on coils for thermodynamic energy transfer will benefit from regularly scheduled cleaning of the coils.

HVAC systems must be properly sized and maintained regularly to realize desired efficiency results. For example, according to US Dept of Energy website up to 30% energy savings can result from compressor energy alone if coils are cleaned vs. not. In addition this may help with dust control, promote equipment longevity, and improved indoor air quality and comfort. Most manufacturers and US Dept of Energy suggest that you inspect and clean coils and other components as much as annually. To learn more you can visit:

www.nadca.com
www.safetyking.com
www.ductpro.com
www.ductcleanersnetwork.org
www.energy.gov

MJ Palazzolo
President
Safety King Inc
An Energy Star Service Partner
alan93  
#10 Posted : Sunday, August 23, 2009 11:54:16 AM(UTC)
Quote
alan93

Rank: Member

Groups: Registered
Joined: 1/12/2009(UTC)
Posts: 20

Originally Posted by: Karpentor Go to Quoted Post
Use a shopvac (if you have one) connect the hose to the other end and use the vac as a blower. You need to blow out the dirt, I usually use compressed air to gently move the dust away from the compressor and collect it on the front side.:D


yea sounds like a plan i may try that.
I think I've done it once, but sadly this situation has fallen into the out-of-site out-of-mind category. They have indicator lights for when to change water filter but what is needed is light to indicate time to clean coils. Why hasn't necessity been the mother of invention for that one?

so maybe the relay/starter has gone bad from frequent power outages and overheating of coils not cleaned regularly?

Still waiting for parts.
Quick Reply Show Quick Reply
Users browsing this topic
2 Pages12>
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.