Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
onethumb  
#1 Posted : Tuesday, August 4, 2009 8:37:12 PM(UTC)
onethumb

Rank: Member

Groups: Registered
Joined: 8/4/2009(UTC)
Posts: 3

I have a whirlpool fringe model ed25qfxhw01 and the water shoot for the ice maker keeps freezing up with ice.
Can the problem be the [FONT='Arial','sans-serif']Water inlet valve?[/FONT]
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kayakcrzy  
#2 Posted : Wednesday, August 5, 2009 4:45:31 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Originally Posted by: onethumb Go to Quoted Post
i have a whirlpool fringe model ed25qfxhw01 and the water shoot for the ice maker keeps freezing up with ice.
can the problem be the [font='arial','sans-serif']water inlet valve?[/font]


look and see if the flap is closing in the dispenser area, where the ice comes through to your glass. if not, the little inertia motor is the problem. tom
onethumb  
#3 Posted : Wednesday, August 5, 2009 9:00:11 AM(UTC)
onethumb

Rank: Member

Groups: Registered
Joined: 8/4/2009(UTC)
Posts: 3

Originally Posted by: kayakcrzy Go to Quoted Post
look and see if the flap is closing in the dispenser area, where the ice comes through to your glass. if not, the little inertia motor is the problem. tom


flap is closing.
onethumb  
#4 Posted : Wednesday, August 5, 2009 12:53:30 PM(UTC)
onethumb

Rank: Member

Groups: Registered
Joined: 8/4/2009(UTC)
Posts: 3

Originally Posted by: onethumb Go to Quoted Post
Flap is closing.

could it be the water inlet valve?
kayakcrzy  
#5 Posted : Thursday, August 6, 2009 3:11:15 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Originally Posted by: onethumb Go to Quoted Post
could it be the water inlet valve?


i am sorry, i was thinking the dispenser area. now i understand what you are talking about. yes, the water valve is leaking a small amount of water, and it is freezing up where the water fill tube, drops the water into the icemaker. you also want to be sure where the tube goes into the freezer section, on the outside, that it is sealing well. if air gets in there, the same condition will occur. tom
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.