Frigidaire diswasher stops mid cycle Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: FDB421RFR2	Brand: Frigidaire	Age: More than 10 years
Previous Topic Next Topic

bhacker		#1 Posted : Friday, July 17, 2009 3:58:44 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2009(UTC) Posts: 5		My dishwasher stops about mid cycle. If I manually advance the timer, it will finish the cycle. However, the drying cycle seems to finish faster than normal and it doesn't get the dishes dry.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Friday, July 17, 2009 3:18:59 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I would check the thermostat (#29 on the diagram) and the heating element for continuity. - The thermostat Part number: AP2109201 - The heating element Part number: AP4424048 Here are the breakdown diagrams and Replacement parts for FRIGIDAIRE FDB421RFR2 | AppliancePartsPros.com Gene.
User Profile View All Posts by User View Thanks

bhacker		#3 Posted : Saturday, July 18, 2009 3:43:21 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2009(UTC) Posts: 5		Thanks Gene. I'll check them out and let you know. Bob
User Profile View All Posts by User View Thanks

bhacker		#4 Posted : Monday, July 20, 2009 1:52:49 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2009(UTC) Posts: 5		I checked the element and got 13ohms. Isn't that fairly normal? The thermostat reads just over 1k ohm. Does this mean it's good or bad? Thanks, Bob
User Profile View All Posts by User View Thanks

Gene		#5 Posted : Monday, July 20, 2009 1:56:17 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Bob, Looks like the thermostat is the culprit. Normally it should be close to 0 Ohms. Gene.
User Profile View All Posts by User View Thanks

bhacker		#6 Posted : Monday, July 20, 2009 2:03:50 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2009(UTC) Posts: 5		I spoke too soon. I can't find the thermostat on the diagram. The one I did find in the parts list, had a different part number than the one you gave me. I ohmed out a switch in the control panel. Where is the thermostat?
User Profile View All Posts by User View Thanks

bhacker		#7 Posted : Monday, July 20, 2009 3:08:51 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2009(UTC) Posts: 5		I found the thermostat. It is open. I'll order a new one.
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Monday, July 20, 2009 7:54:15 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Keep us posted. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)