2 Pages12> Go to Page...

JennAire Oven Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Jenn-Air	Age: Less than 1 year
Previous Topic Next Topic

mklayers		#1 Posted : Wednesday, July 15, 2009 1:39:26 PM(UTC)
Rank: Member Groups: Registered Joined: 7/15/2009(UTC) Posts: 5		Am in the middle of installing a new Jenn Aire oven with downdraft and have a part that is a black cylinder about 1" in diameter and 2 inches long. Weak magnet at the end. Says "Drying Only" on the side. What is it and what is it for? Thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Wednesday, July 15, 2009 6:59:36 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What the installation instructions said about this part? Can you post a picture of the part? Gene.
User Profile View All Posts by User View Thanks

mklayers		#3 Posted : Thursday, July 16, 2009 4:41:52 AM(UTC)
Rank: Member Groups: Registered Joined: 7/15/2009(UTC) Posts: 5		There is nothing in the paperwork showing this part. It was in a large plastic bag, loose, with other parts bundled into smalled plastic bags. the stove is in and works fine - I am wondering if it is for a dryer or something. Having trouble attaching a picture - will try again in a separate post. THanks!
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, July 16, 2009 1:41:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Sounds very strange. Did you buy any other appliances together with the stove from the same place? Gene.
User Profile View All Posts by User View Thanks

mklayers		#5 Posted : Thursday, July 16, 2009 2:19:14 PM(UTC)
Rank: Member Groups: Registered Joined: 7/15/2009(UTC) Posts: 5		Just the oven.
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Thursday, July 16, 2009 4:00:55 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I have no idea what is this part for. Might be a picture will make it clear. Gene.
User Profile View All Posts by User View Thanks

mklayers		#7 Posted : Thursday, July 16, 2009 4:06:46 PM(UTC)
Rank: Member Groups: Registered Joined: 7/15/2009(UTC) Posts: 5		Thanks for trying Gene. I have tried to post a picture on numerous occasions but for some reason it doesn't work. But the stove/oven does work so I am going to chalk this up to one of life's mysteries....Thanks again!
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Thursday, July 16, 2009 4:10:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check the size of the picture file. If it's too large it would not go through. Gene.
User Profile View All Posts by User View Thanks

mklayers		#9 Posted : Thursday, July 16, 2009 4:13:29 PM(UTC)
Rank: Member Groups: Registered Joined: 7/15/2009(UTC) Posts: 5		I made the file smaller - but when I 'upload' the dialogue box goes blank after about 10 seconds - tried with several different pictures. I can send you the picture if you have an email I can send it to but that may not be within the rules of the forum.
User Profile View All Posts by User View Thanks

Gene		#10 Posted : Thursday, July 16, 2009 4:31:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Try to use the "Contact Us" link on the bottom of this page. Might be the forum Admin could help you. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)

2 Pages12> Go to Page...