Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Secondary Water Valve
Options
Go to last post Go to first unread
Model: ARS8265BC PARS58265BCO Brand: Amana Age: 5 - 10 years
Previous Topic Next Topic
Von Hefling  
#1 Posted : Thursday, July 9, 2009 3:45:50 PM(UTC)
Von Hefling

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 4
Ordered AP4009555 a secondary water valve and the design does not match the part in place. The new part has a quick disconnect on the tubing and the original part is threaded.
We verified with customer service that the correct part was ordered. She suggested you might be able to help us make this part work or order the correct part.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
woodchuckie  
#2 Posted : Thursday, July 9, 2009 3:51:50 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
Cut the threaded end off and just insert the cut end in the new valve. You may need to hold the ring in on the new valve and release when the line is pushed in.
Back to top
Von Hefling  
#3 Posted : Thursday, July 9, 2009 3:58:27 PM(UTC)
Von Hefling

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 4
Ok - Will try. Will keep you posted. Thanks for the quick reply!
Back to top
Von Hefling  
#4 Posted : Thursday, July 9, 2009 4:50:03 PM(UTC)
Von Hefling

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 4
Got it in. There is no "o-ring" in the outlet on the water dispenser side of the valve. Can't stop the leak when try the water dispenser. The tubing is stiff with a coil inside so it won't give. Now what?
Back to top
richappy  
#5 Posted : Thursday, July 9, 2009 5:53:53 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Your tubing might be hard and the valve will not seal properly. Tubing must be soft enough to allow a compression fitting to compress properly.
Back to top
Von Hefling  
#6 Posted : Friday, July 10, 2009 6:36:45 AM(UTC)
Von Hefling

Rank: Member

Groups: Registered
Joined: 7/9/2009(UTC)
Posts: 4
All three of the tubing pieces are the same with a metal coil inside. The other two slipped right in - the sides with the "o-ring" in the valve. Did the manufacturer of the valve leave out this "o-ring"? We don't see that we can replace this piece of tubing without taking off the back of the refrigerator.
Back to top
woodchuckie  
#7 Posted : Friday, July 10, 2009 7:36:36 AM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
Is this the one you received. It shows a compression ring on each of the three outlets. Part number: AP4009555
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Replacing secondary water valve kit (Refrigerator & Freezer Repair)
by jameskearns 7/2/2009 12:39:24 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET