Microwave won't start and has no power - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Microwave won't start and has no power Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Frigidaire	Age: More than 10 years
Previous Topic Next Topic

denise1		#1 Posted : Tuesday, July 7, 2009 11:30:54 AM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2009(UTC) Posts: 3		I have a Frigidaire Professional Gallary Series over the range Microwave, model #FMT118EPB\W. While popping a bag of popcorn, I heard a boom or loud pop sound from the microwave and all power was lost to the microwave. No other power was lost in my house. I checked the circuit breakers and none were tripped. A few months prior to this event, I noticed that the light on the microwave over the range had begun to dim. Until the boom event, I had no other problems with the microwave. There is no power at all with the microwave. Nothing works on it. Is this a simple problem or do I need to replace the microwave?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

magician59		#2 Posted : Tuesday, July 7, 2009 1:49:33 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Sounds like there was a direct short to ground. First check to see if there's power at the outlet.


User Profile View All Posts by User View Thanks

denise1		#3 Posted : Tuesday, July 7, 2009 3:12:40 PM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2009(UTC) Posts: 3		Thanks. I checked the outlet and there is power.


User Profile View All Posts by User View Thanks

magician59		#4 Posted : Thursday, July 9, 2009 1:03:14 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Diagnosis can be quite involved, but if you're willing to follow along with the procedure, We'll get started. You need a fairly good (doesn't need to be expensive) multi meter. Plus you will have to follow very strict safety rules. There are thousands of volts in some of the components, and ignorance will cause severe injury or death. If you're sensible and capable, let's start.


User Profile View All Posts by User View Thanks

denise1		#5 Posted : Thursday, July 9, 2009 5:18:56 PM(UTC)
Rank: Member Groups: Registered Joined: 7/7/2009(UTC) Posts: 3		Thanks, but this sounds like it will be too involved. Replacement sounds easier.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close