7 Pages<1234>» Go to Page...

Whirlpool Oven won't heat up Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SF362LXSQ	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

BrianStanton		#11 Posted : Monday, July 6, 2009 6:55:54 PM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2009(UTC) Posts: 6		I am experiencing the same problem, but both legs are measuring approximately 208 ohms. Is this close enough, or is there some other problem? No gas at all is making it out of the valve when I disconnect the lines. Im at a total loss here.
User Profile View All Posts by User View Thanks

Gene		#12 Posted : Monday, July 6, 2009 7:54:21 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: BrianStanton I am experiencing the same problem, but both legs are measuring approximately 208 ohms. Is this close enough, or is there some other problem? No gas at all is making it out of the valve when I disconnect the lines. Im at a total loss here. What is the complete model number of the oven? Can you be more specific on the problem? Gene.
User Profile View All Posts by User View Thanks

BrianStanton		#13 Posted : Tuesday, July 7, 2009 4:39:59 AM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2009(UTC) Posts: 6		The oven model number is SF362LXSB0. The problem is that the oven/broiler does not heat up at all. I checked the gas flow at the valve for the cook top burners, and all is fine there, but nothing comes out when I try to start the oven part. I checked the resistances, but all looks normal there too.
User Profile View All Posts by User View Thanks

v2k04		#14 Posted : Tuesday, July 7, 2009 5:38:10 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		I bet it's the solenoids on the gas valve check your resistance on it Those valves are crap even tho the top works it would keep the oven from working http://www.servicematters.com/docs/wiring/wiring_main.htm Check between each solenoid for 216 Ω resistance (Broil terminal to Common, and Bake terminal to Common). NOTE: Always check both solenoids. If one of the solenoids is defective, neither one will operate
User Profile View All Posts by User View Thanks

BrianStanton		#15 Posted : Tuesday, July 7, 2009 6:23:10 AM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2009(UTC) Posts: 6		I've checked those, both are getting 208ish ohms resistance.
User Profile View All Posts by User View Thanks

v2k04		#16 Posted : Tuesday, July 7, 2009 7:35:43 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		next question are you getting voltage to it? is the electrode sparking? did the safety on the valve accidently get tripped?
User Profile View All Posts by User View Thanks

BrianStanton		#17 Posted : Tuesday, July 7, 2009 7:50:58 AM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2009(UTC) Posts: 6		The igniters are arcing. I haven't checked voltage, should I set it to bake and check for voltage at those same connections? And where is the safety valve to check for?
User Profile View All Posts by User View Thanks

v2k04		#18 Posted : Tuesday, July 7, 2009 8:23:22 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		yes the safety is on the back of valve its a brass lever
User Profile View All Posts by User View Thanks

BrianStanton		#19 Posted : Tuesday, July 7, 2009 8:38:10 AM(UTC)
Rank: Member Groups: Registered Joined: 7/6/2009(UTC) Posts: 6		Part Details - WHIRLPOOL Gas valve/regulator, part number: AP3866825 is the safety the valve in the lower left corner of this picture?
User Profile View All Posts by User View Thanks

v2k04		#20 Posted : Tuesday, July 7, 2009 9:16:10 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		yup..................
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (8)

Similar Topics

whirlpool oven won't heat up (Oven Repair (including Ranges and Cooktops)) by smeighan 11/19/2012 4:38:18 PM(UTC)

Whirlpool oven won't heat up (Oven Repair (including Ranges and Cooktops)) by dlchunting 11/30/2008 6:06:41 PM(UTC)

7 Pages<1234>» Go to Page...