Rank: Advanced Member
Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647
|
jayp wrote:No I just unplugged and checked it across the probe itself, I am not sure where it plugs into the board at. The wiring to the sensor can also be responsible for problems as described at the previous "How do I check an oven temperature sensor?" link, although it is only a fairly infrequent culprit. JFYI Dan O. www.Appliance411.com
The Appliance Information Site=D~~~~~~
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/12/2009(UTC)
Posts: 9
|
I finally had to call a technician and he said the F7 is a touch pad problem like a short in it from one of the cooking elements, the oven would work ok without any errors. So unfortunately the part alone will be around 400.00. I just wanted to reply to say it is solved it seems and thank you very much.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647
|
Quote:a technician and he said the F7 is a touch pad problem For most makes but not for Frigidaire whom made your model for Sears. Quote:I just wanted to reply to say it is solved You actually replaced that part and it corrected the problem? :confused: Dan O. www.Appliance411.com
The Appliance Information Site=D~~~~~~
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/12/2009(UTC)
Posts: 9
|
The part has been ordered so not installed yet, so now I am getting worried. But when the stove was in error I held a hair dryer over the left side on the touch pad and after about 3 minutes the error codes went out and it worked for a while then started up again. So it seems there is a short in the matrix inside.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/12/2009(UTC)
Posts: 9
|
This is the final follow up just to complete the thread and maybe help someone else some day. Raplacing the touch pad did cure the problem so it seems it was shorted with a key depressed some place on the left side. I must say I was reluctant to order that expensive part but it is fixed so I am happy. I appreciate all your help Dan thanks again.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/31/2009(UTC)
Posts: 647
|
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
