Spacemaker 1800 on fire - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Spacemaker 1800 on fire Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: JVM1850WD001	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

Skroela		#1 Posted : Thursday, June 25, 2009 4:49:32 AM(UTC)
Rank: Member Groups: Registered Joined: 6/25/2009(UTC) Posts: 3		I was reheating coffee when the microwave caught fire!. I unplugged it, cleaned the mess. The fire was located on the right hand inside panel, on the rack holder. When I plugged it in, the unit works continuously, lights on and it looks like a thunder storm inside, even with the door open it does not stop. is it possible to repair this? can I disable the microwave and continue using the fan and the lights? thank you for your help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Thursday, June 25, 2009 5:05:57 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the top grill and open the control panel. Check all door switches and inspect the control board for a burned spots. Post the results. Here are the breakdown diagrams and Replacement parts for GE JVM1850WD001 \| AppliancePartsPros.com Gene.


User Profile View All Posts by User View Thanks

Skroela		#3 Posted : Saturday, June 27, 2009 11:07:25 AM(UTC)
Rank: Member Groups: Registered Joined: 6/25/2009(UTC) Posts: 3		Thanks for your prompt reply!. I removed the grill and check the board. There's a burn spot on the board nothing big just a small spot on the conector CN08 SENSOR, everything else looks OK.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Saturday, June 27, 2009 1:55:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Possible the gas sensor (#62 on the diagram) is damaged as well as the control board. Gene.


User Profile View All Posts by User View Thanks

Skroela		#5 Posted : Saturday, June 27, 2009 3:15:23 PM(UTC)
Rank: Member Groups: Registered Joined: 6/25/2009(UTC) Posts: 3		Thank you. I think it would be better just to buy a new one. One last question, is it difficult to install this type of microwave?, the guy at the store is charging $200. Is it something I can do myself? Thanks again.


User Profile View All Posts by User View Thanks

Gene		#6 Posted : Saturday, June 27, 2009 6:38:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		A new microwave comes with the installation instructions. If you know how to handle a simple hand tools and you have a good drill then you can do it. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close