|
I have a 5 yo Whirlpool side by side and all of the LED lights went out at the same time. Model WRS342FIAM02
|
|
|
|
Im following most of these posts in this thread regarding the IR boards and the status of the red LED. But no one saying whether in addition to holding in the flapper they are or are not also pushing in on the door light switch above ????
Im trying to determine the normal behavior of this red LED.....
Thanks, ghostrider
|
|
Greg, Go back to the first page of this thread and perform the troubleshooting as described there. Here are the break down diagrams for Model GSF26C5EXB00
|
|
i've now replaced the inlet valve....still not making ice....Greg
|
|
My bad....it’s GSF26C5EXB00
|
|
The model number you posted does not come up. Please verify and repost it.
|
|
My Whirpool side by side model GEF26C5EXBOO is not making ice....the drinking water side works fine....I replaced the ice maker and it made 2 cycles of ice and has not made any since....any help would be greatful....Greg
|
|
I have a Whirlpool model # GS5SHAXNL00 and ran a diagnostic status. It'll blink twice and pause and repeat when door is opened. When I push back the flapper door, the red light stays on. My ice maker has stopped making ice all of a sudden. I don't hear it filling up in the ice maker at all but I am able to get water from the door dispenser. I checked the ice maker and nothing is in there to clog it up. What can I do to make it work again without having to call a technician to come and fix it? Please help! We would like to have ice again, especially living in Texas. Thanks!
|
|
I am having the same issue---SbS has stopped making ice. There is water to the system, because the water dispenser works. When I unblock the beam, the LED on the right glows red continuously. Any ideas of what I should do? I'm here in rural France where it's not easy to get advice on this, so any help much appreciated!
|