Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Friday, February 8, 2013 11:41:03 AM(UTC)
	Here are your parts Parts for Frigidaire FEFL79HBB Range - AppliancePartsPros.com Here is the wiring diagram http://manuals.frigidaire.com/p...ingfield/316519936en.pdf Yes it looks like your control board is bad (Item 20 in the Backguard Parts section) You may also need a new overlay (part 20A) sometimes they do not come off without damaging the part. Heating it up with a hair dryer often loosens it, just do not overheat it.
	THIS FORUM IS DEAD!!!!!!!
johnthrasher45	Posted: Friday, February 8, 2013 6:55:13 AM(UTC)
	Originally Posted by: denman I cannot find find any info on the given model number, please check it. All the units I find have 3 letters at the end not 2. If the stove top elements work OK and the wiring from/to the elements from the control board is OK then odds are that your control board is shot. The model number is FEFL79HBB
denman	Posted: Friday, February 8, 2013 6:12:50 AM(UTC)
	I cannot find find any info on the given model number, please check it. All the units I find have 3 letters at the end not 2. If the stove top elements work OK and the wiring from/to the elements from the control board is OK then odds are that your control board is shot.
	THIS FORUM IS DEAD!!!!!!!
johnthrasher45	Posted: Friday, February 8, 2013 3:57:12 AM(UTC)
	Need help with a oven. Put new heating elements in and it still no t working.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close