|
the belt checked out fine. I am wondering if is the motor
|
|
Remove panel #27 in the driagram by removing the three (#47) screws. You will be able to look behind the panel and see the belt around the drum, unless it's broken, then it maybe on the bottom.
|
|
I will need tocheck in the am it is too dark to work in the area.t just did not sound like a belt
|
|
So you checked the belt and it was fine?
|
|
It sounded electrical when i pushed the start buttom. a little like a contact problem
|
|
The switch is #4 in the diagram.
|
|
|
|
when we pushed the start button it made a noise. then stopped working completely, i checked the contact knob on the dryer and it is clicking okay. power is fine to the dryer. this is a stacked washer dryer unit
|