|
I want to say thanks. I did fix the dryer. I checked the braker and it wasn't good. I replaced the braker and the dryer is working again. Thank you very much for you help.
I told already to my friends about you. You made me save to buy a new dryer.
Thanks again.
|
|
Have you checked the power?
Try flipping the breaker off/on slowly a couple times. Sometimes you can loose half the line without actually tripping the breaker. Check the voltage at the plug L1 to L2 should be 240 volts L1 to Neutral and L2 to Neutral, both should be 120 volts. If OK Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out If OK Check the power at the terminal strip. Do this with the heater off and on. [COLOR="Red"]Be careful as 240 volts is lethal !!![/COLOR]
|
| THIS FORUM IS DEAD!!!!!!! |
|
My dryer run but not heat at all. I did replace the heating element, Dryer thermal cut-off kit I did check the fuse etc and is ok. but I didn't check the timer control. I did clean the vent, still no heat.
Could you help me, please?
|