Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=denman;195018]Here are your parts
[url=http://www.appliancepartspros.com/partsearch/modelsearch.aspx?model=GSB5755DS]Replacement parts for GSB5755DS models | AppliancePartsPros.com[/url]

Here is the tech sheet
[URL="http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154476701.pdf"]http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154476701.pdf[/URL]

And here is the closest thing I could find in a manual
[URL="http://frigidaireservicetips.com/pdfs/484_2.pdf"]http://frigidaireservicetips.com/pdfs/484_2.pdf[/URL]

If they use the same thermistor which is likely, it should be 10,000 ohms at 77 degrees F.

I would also check the heating element and the hi-limit thermostat.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
bradford	Posted: Thursday, March 4, 2010 6:02:31 AM(UTC)
	Thank you so much. I will see what I can do from there. Thanks again.
denman	Posted: Wednesday, March 3, 2010 1:56:50 PM(UTC)
	Here are your parts Replacement parts for GSB5755DS models \| AppliancePartsPros.com Here is the tech sheet http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154476701.pdf And here is the closest thing I could find in a manual http://frigidaireservicetips.com/pdfs/484_2.pdf If they use the same thermistor which is likely, it should be 10,000 ohms at 77 degrees F. I would also check the heating element and the hi-limit thermostat.
	THIS FORUM IS DEAD!!!!!!!
bradford	Posted: Wednesday, March 3, 2010 1:09:39 PM(UTC)
	Anyone? It's been a while, but I thought I would ask again.
bradford	Posted: Sunday, December 28, 2008 5:57:29 PM(UTC)
	bump. Anyone?
bradford	Posted: Wednesday, December 24, 2008 11:56:47 AM(UTC)
	Did you ever get a fix for this? My DW does the same thing. We just started running it at night since it takes SO LONG. i just accepted it as a fluke, but I would really like to fix it. I even turned my water heater up. No difference. Anyone, Brad
DaleHurd	Posted: Saturday, January 19, 2008 11:00:04 AM(UTC)
	My Frigidaire dishwasher (Model GSB5755DS) is taking forever to finish on the light cycle. When I start the display reads 89 (this is for 89 minutes) then it jumps down to 54 (54 minutes) a short time after that the display will read HO. The cycle then may take up to 3 hours to complete. My hot water is very hot so I'm wondering if it is the hot water sensor. Has anyone run into this before?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close