Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Last 10 Posts (In reverse order)
jaime	Posted: Thursday, January 17, 2008 4:11:23 AM(UTC)
	yeah it looks like that it, cause motor is runnig and move the belt, but the basket is like frozed! well thanks you for your help i appreciated
Gene	Posted: Wednesday, January 16, 2008 7:12:06 PM(UTC)
	In that case the transmission is bad. - The part number for the transmission is AP3500335 Gene.
jaime	Posted: Wednesday, January 16, 2008 6:45:11 PM(UTC)
	i did all that, and i checked the belt and it is running but the basket doesn't move.
Gene	Posted: Wednesday, January 16, 2008 3:13:45 PM(UTC)
	Remove the front panel and check the belt and the belt tension when the washer goes on spin. Check the transmission pulley. If there is nothing wrong then the transmission gone bad. Gene.
jaime	Posted: Wednesday, January 16, 2008 3:11:53 PM(UTC)
	i also checked the lid switch with a screw driver, to see if it would make a click sound; and it does.
jaime	Posted: Wednesday, January 16, 2008 3:04:55 PM(UTC)
	yes it drain, the motor i'm pretty sure runs, because i looked underneath and the belt was running.
Gene	Posted: Wednesday, January 16, 2008 9:16:49 AM(UTC)
	Did the motor run when it comes to spin? Did it drain? Provide as much information as possible. Gene.
jaime	Posted: Tuesday, January 15, 2008 6:06:51 PM(UTC)
	but still, when i open the lid it will shut the machine off, is this still a bad switch
Gene	Posted: Tuesday, January 15, 2008 4:34:01 PM(UTC)
	Most likely the problem is a bad lid switch. - The part number for the lid switch is AP204378 Here are the break down diagrams for the Admiral washer Model LNC6764A71 Gene.
jaime	Posted: Tuesday, January 15, 2008 8:19:56 AM(UTC)
	it work good at the begining but when is time to spin it won't spin

Notification