Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=kayakcrzy;114546][quote=mikeo1899;114055]dryer doesn't get hot, i opened the front & the following is what i found. looks like ignitor is working it glows & flame comes on for 5-10 second.
then flame goes out.  any suggestions ?
thanks,
mike[/quote]

mike unhook the vent hose from the back of the dryer and do the same test. feel and see if the air comes out hard where the vent is. if it does the same with the vent off, replace the coils on the gas valve.   tom  [/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
kayakcrzy	Posted: Wednesday, August 12, 2009 3:12:38 AM(UTC)
	Originally Posted by: mikeo1899 I changed both coils and it works fine now Thanks, Mike Awesome!!!:cool: Tom ApplianceEducator.com
mikeo1899	Posted: Tuesday, August 11, 2009 9:27:27 AM(UTC)
	I changed both coils and it works fine now Thanks, Mike
kayakcrzy	Posted: Thursday, August 6, 2009 3:24:06 AM(UTC)
	Originally Posted by: mikeo1899 Thanks, I will try it later when I get home I hope all went well. Tom ApplianceEducator.com
mikeo1899	Posted: Wednesday, August 5, 2009 6:26:27 AM(UTC)
	Thanks, I will try it later when I get home
kayakcrzy	Posted: Wednesday, August 5, 2009 4:39:16 AM(UTC)
	Originally Posted by: mikeo1899 dryer doesn't get hot, i opened the front & the following is what i found. looks like ignitor is working it glows & flame comes on for 5-10 second. then flame goes out. any suggestions ? thanks, mike mike unhook the vent hose from the back of the dryer and do the same test. feel and see if the air comes out hard where the vent is. if it does the same with the vent off, replace the coils on the gas valve. tom
mikeo1899	Posted: Tuesday, August 4, 2009 9:15:16 AM(UTC)
	Dryer doesn't get hot, I opened the front & the following is what I found. Looks like ignitor is working it glows & flame comes on for 5-10 second. Then flame goes out. Any suggestions ? Thanks, Mike

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close