Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=denman;288018]Here are your parts
[url=http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5156927]Replacement parts for FRIGIDAIRE AEQ7000EG0 Frigidaire/dryer | AppliancePartsPros.com[/url]

Here is the tech sheet for this unit
[URL="http://manuals.frigidaire.com/prodinfo_pdf/Webster/134682200ts_wd_EFS.pdf"]http://manuals.frigidaire.com/prodinfo_pdf/Webster/134682200ts_wd_EFS.pdf[/URL]

And a service manual
[URL="http://frigidaireservicetips.com/pdfs/492_AffinityDryerManual.pdf"]http://frigidaireservicetips.com/pdfs/492_AffinityDryerManual.pdf[/URL]

Try unplugging the unit for 5 minutes or so to see if it will reset.

Try running the diagnostics.

Try flipping the breaker off/on slowly a couple times, sometimes you can loose half the line without actually tripping the breaker.
If this does nothing, check the voltage at the plug
L1 to L2 should be 240 volts
L1 to Neutral and L2 to Neutral, both should be 120 volts.
If OK
Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out
If OK
Check the power at the terminal strip.
[COLOR="Red"]Be careful as 240 volts is lethal !!! [/COLOR][/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
denman	Posted: Saturday, October 16, 2010 4:16:28 AM(UTC)
	Here are your parts Replacement parts for FRIGIDAIRE AEQ7000EG0 Frigidaire/dryer \| AppliancePartsPros.com Here is the tech sheet for this unit http://manuals.frigidaire.com/prodinfo_pdf/Webster/134682200ts_wd_EFS.pdf And a service manual http://frigidaireservicetips.com/pdfs/492_AffinityDryerManual.pdf Try unplugging the unit for 5 minutes or so to see if it will reset. Try running the diagnostics. Try flipping the breaker off/on slowly a couple times, sometimes you can loose half the line without actually tripping the breaker. If this does nothing, check the voltage at the plug L1 to L2 should be 240 volts L1 to Neutral and L2 to Neutral, both should be 120 volts. If OK Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out If OK Check the power at the terminal strip. [COLOR="Red"]Be careful as 240 volts is lethal !!! [/COLOR]
	THIS FORUM IS DEAD!!!!!!!
briggins8	Posted: Saturday, October 9, 2010 3:48:45 PM(UTC)
	The dryer spins but doesn't produce heat and all the lights on the front flash from time to time.:mad:

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close