Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=kazzy;870151]I am trying to remove the screw that is holding drive pulley and drum for my Frigidaire ATF7000FS0. 
#29 of [URL="http://www.********************************.com/partsdirect/part-model/Frigidaire-Parts/Washer-Parts/Model-ATF7000FS0/1428/0153200/R0703104/00003?blt=06&prst=&shdMod="]this diagram[/URL]

I am using the metric hex wrench and it does not budge (even hex wrench was slightly got bent.)
From the [URL="http://www.appliancepartspros.com/frigidaire-screw-134408400-ap3844436.html"]picture for this parts[/URL], I'd need to turn counter-clock-wise.


what would i need to use/do? I did WD40, tapping with hammer, etc...


Any help is appreciated.

kazzy[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
kazzy	Posted: Wednesday, November 19, 2014 3:58:52 PM(UTC)
	I am trying to remove the screw that is holding drive pulley and drum for my Frigidaire ATF7000FS0. #29 of this diagram I am using the metric hex wrench and it does not budge (even hex wrench was slightly got bent.) From the picture for this parts, I'd need to turn counter-clock-wise. what would i need to use/do? I did WD40, tapping with hammer, etc... Any help is appreciated. kazzy

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close