Post a reply - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Post a reply

From:

Message:

Maximum number of characters in each post is: 32767

Font Color Font Size

[quote=Simon / APP Team;751081]Hi,David.

First check the water valve by switching around electrical plugs at the valve and pressing the water lever at the dispenser.
If the icemaker fills up - the valve is good.

Next - check the optic controls.

Make sure it's on. Open the freezer door and view the LED status:
Two pulses followed by a one second delay.  Could be the flapper door is open or the icemaker is in the harvest mode.
Press in the freezer door switch.
When in the harvest mode, the LED will flash once every second.
No lamp - replace the control.

Press in the flapper door: 

Two pulses followed by the a one second delay - the optics are bad.
LED is steady on - the optics are good.

The optics control kit [PART]4389102 [/PART]

Here are the breakdown diagrams and [URL="http://www.appliancepartspros.com/partsearch/model.aspx?model_id=504094"]Replacement parts for Whirlpool KSRG25FKBL02 REFRIGERATOR | AppliancePartsPros.com[/URL]

Thank you/ Post the result.

Simon.[/quote]

Security Image:

Enter The Letters From The Security Image:

Preview Post Cancel

Last 10 Posts (In reverse order)
Simon / APP Team	Posted: Thursday, July 5, 2012 10:33:32 AM(UTC)
	Hi,David. First check the water valve by switching around electrical plugs at the valve and pressing the water lever at the dispenser. If the icemaker fills up - the valve is good. Next - check the optic controls. Make sure it's on. Open the freezer door and view the LED status: Two pulses followed by a one second delay. Could be the flapper door is open or the icemaker is in the harvest mode. Press in the freezer door switch. When in the harvest mode, the LED will flash once every second. No lamp - replace the control. Press in the flapper door: Two pulses followed by the a one second delay - the optics are bad. LED is steady on - the optics are good. The optics control kit Part number: 4389102 Here are the breakdown diagrams and Replacement parts for Whirlpool KSRG25FKBL02 REFRIGERATOR \| AppliancePartsPros.com Thank you/ Post the result. Simon.
Shut up	Posted: Thursday, July 5, 2012 8:01:23 AM(UTC)
	I installed the new ice maker I received from this co. It still won't make ice, no water is being dispensed to the maker. The water from door works normally. What else can I do to diagnose the reason for it not working ?

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close