|
Hi! Just wondering if changing the igniter worked ok??
|
|
The installation instructions are attached to the reply.
Gene.
|
|
Originally Posted by: Gene You are welcome. Keep us posted.
Gene. Gene - how do you install this part? Do you have to take off the kick panel as well as the panel that holds the electrical wires to reach the screws to take off the old ignitor? Thanks much! I have the same issue and just ordered my ignitor.
|
|
Yes. You can cut off the plug and connect the igniter using a high temperature porcelain wire nuts Part number: AP3440631
It sounds a bit strange why the igniter you received, if ordered it from Appliance Parts Pros and the part number is AP2832933, looks different. I'll forward this information to their customer service. Gene.
|
|
Hi Gene,
I've received the igniter but our original one has 2 separate connecters with like the image above but the new one I've just received has a single connecter for both wires. Can we replace them with separate connecters?
|
|
You are welcome. Keep us posted.
Gene.
|
|
Hi Gene, The igniter had less than 2.8 amp. We will get the igniter! Thanks for your help!
|
|
Originally Posted by: fcyn77 Thermador MBY microwave turns itself off after 2-3 seconds periodically. I read that the push-on connector of upper door latch may be going bad. Can anyone tell me the thermador part number for a new push on? Additionally, can you recommend a tech in Austin, Texas who can perform the repair? Thanks, Fred. Fred, This is very sophisticated oven and you have to find a guy who really knows it. Try to use Service Magic web site. Gene.
|
|
Originally Posted by: fullmoonclay Hi Gene, Thanks for the reply. I am trying to locate a meter right now. If it reads more than 3.2 amp should I replace the valve next? No. Just post the results. Gene.
|
|
Hi Gene, Thanks for the reply. I am trying to locate a meter right now. If it reads more than 3.2 amp should I replace the valve next?
|