Rank: Member
Groups: Registered
Joined: 6/1/2012(UTC)
Posts: 1
|
I have had this GE washing machine for 2 years with no issues until now. The cold/hot water connections via tubing are fine. When I turn the knob and pull to start the load, water does not come out at all. Instead the machine starts to agitate even though there is no water at all. (Update: Now the machine does not even agitate) Also, if I turn the knob ahead to the spin cycle, the washing machine does nothing. I'm assuming this is related to the water issue but I'm not sure. Can you please tell me which part do you think needs to be replaced?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
I sounds like the timer is the issue, but it could be the water level pressure switch. Since that is an inexpensive part Part number: AP4358796
I would start with that, and if that does not fix things try replacing the timer unit.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
