Rank: Member
Groups: Registered
Joined: 2/25/2008(UTC)
Posts: 4
|
I need instructions on replacing clock timer control. I have one coming to me under warranty and will install myself. I have purchased a new overlay for the control unit from AppiancePartsPro.com. Mechanical diagrams with instructions would be helpful. :) :) :)
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Pull off the range and remove the back cover from the control panel.
Now you can access the EOC.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2008(UTC)
Posts: 4
|
Thanks for the input...waiting on the overlay before I pull the range out and do my thing.
ChuckH
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Keep me updated, please.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2008(UTC)
Posts: 4
|
Received the overlay and installed the timer/control withour any problems. Thanks for your assistance.
ChuckH
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
I'm glad you were able to fix it.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/25/2008(UTC)
Posts: 4
|
To add insult to injury...we had a brown-out late this afternoon and I took the entire house off line within 1 minute. I hope I didn't stress the new control unit. I brought the house back on line one circuit at a time once the power was restored to the right voltage. Fortunately I didn't have a surge come through when they repaired the line which would probably blow out the unit again.
ChuckH
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
To prevent possible damage in such situations you can put the range through the surge protector.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/17/2008(UTC)
Posts: 2
|
wow this has already made me think i don't have to pay 280 + to have this done by a service. i have the number for the clock.and the overlay... just deciding whether we can do it ourselves..help...i am doing the legwork for my husband who is hands on but has never done exactly this..has wired plenty of things though. think he can do it???:confused:
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
