Rank: Guest
Groups: Registered
Joined: 8/10/2018(UTC) Posts: 0  Location: 99556 Was thanked: 4 time(s) in 4 post(s)
|
I took apart the control panel and the internal metal panel from the door of my Bosch SHVM78Z53N/01 … disconnected all the cables, now I don’t know where I have to connect each of them … I lost the pictures that I took of those connections . If someone have pictures of those connections I really will appreciate the help … just to give an example: I see 2 long yellow cables that are coming out from the red light that can be see on the floor but I don’t know where they have to be connected Edited by user Wednesday, May 8, 2024 9:18:15 PM(UTC)
| Reason: Missing model and brand of dishwasher
|
|
|
|
|
|
Rank: Member
Groups: Moderators, APP Team, Registered Joined: 2/27/2024(UTC) Posts: 0 Location: TN Was thanked: 9 time(s) in 9 post(s)
|
Lafred, the 2 yellow wires will connect to connection X2 on the user control. There will be a 7 red wire connector that goes to connection X1, and a 3 orange wire connector that goes to connection X3. There will be 3 red wires that will go from the user control to the dispenser rinse aid sensor. There will also be 2 yellow wires that will go to the dispenser actuator.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
