Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Guest  
#1 Posted : Monday, March 25, 2024 10:05:21 AM(UTC)
Quote
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
The above model dryer with s/n 19771128EE was given to me by a friend for possible repair. The unit will not start and I suspect the timer is bad. This timer is a Kingston Industries typ p/n 4072A 6 3720660 M295. It is a 14 pin connector and 12 of the pins are smaller connectors and 2 are large power terminals. This is a very expensive timer and I would like to know if anyone has ever substituted a cheaper older design Maytag type in place of this type. I have have a lot of older usable timers in my junk box. Also is there a troubleshooting procedure for this original timer ? All fuses and t-stats have been checked and verified as usable.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Guest  
#2 Posted : Wednesday, March 27, 2024 4:59:03 AM(UTC)
Quote
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
In an effort to repair this unit I installed an alternate timer assembly from a Maytag unit which was in good working condition but quite a bit different in configuration than the original p/n 33002803. I saved the original plug and several inches of wires to put a proper timer back in place. Replaceable crimp on connectors were used to install the alternate timer and take it back out if necessary, The replacement timer works but not correctly in all functions so I will p[robably have to bite the bullet and get a proper replacement timer assembly
Guest  
#3 Posted : Wednesday, March 27, 2024 9:23:12 AM(UTC)
Quote
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Does anyone know of a reputable repair /exchange shop for this type and configuration Maytag dryer timer ? The p/n is 33002803.tZBGHbX
Guest  
#4 Posted : Thursday, March 28, 2024 5:35:45 AM(UTC)
Quote
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
There is a company in the Chicago area that offers repair and exchange of appliance circuit boards and to a limited extent repair/exchange of timer assemblies. They are in business as CORE CENTRIC SOUTIONS and are located in Carol Stream , Illinois. The phone number is 630 216 5000 . They also have a web site under the designation partsimple.com . Hope this is of some value to folks in the appliance repair business.
WilliamM/APP Team  
#5 Posted : Thursday, March 28, 2024 5:38:35 AM(UTC)
Quote
WilliamM/APP Team

Rank: Member

Groups: Moderators, APP Team, Registered
Joined: 2/27/2024(UTC)
Posts: 0
United States
Location: TN

Was thanked: 5 time(s) in 5 post(s)
The timer for this model is still available and the following link can be used to view the item information page we have available. https://www.appliancepar...p33002803-ap6007999.html
Guest  
#6 Posted : Friday, March 29, 2024 9:09:34 AM(UTC)
Quote
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Thanks for the info on the exact replacement timer.
Guest  
#7 Posted : Sunday, April 14, 2024 8:52:08 AM(UTC)
Quote
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
This unit has been scrapped due to the high cost of a new timer
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.