Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Bake Element not working everything else fine
Options
Go to last post Go to first unread
Model: GBS307PDS11 Brand: Whirlpool Age: More than 10 years
Previous Topic Next Topic
DBLTRAUMA  
#1 Posted : Saturday, December 31, 2016 5:24:27 AM(UTC)
Quote
DBLTRAUMA

Rank: Member

Groups: Registered
Joined: 12/31/2016(UTC)
Posts: 1
The lower (bake) element in my Whirlpool Gold wall oven in inop. I replaced the element, but still no joy. The old element had developed a hot spot and fractured. Everything else on the oven appears to be working and the resistance on the new element is around 25 ohms, so it appears to be OK. Any suggestions on where to look next?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
ThatGuy  
#2 Posted : Saturday, December 31, 2016 4:00:13 PM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
I suspect the old elements pyrotechnic demise might have taken out the relay on the computer control board.

I'd check the wiring from the element all the way to the CC board. If its OK, then its probably the board.

You should be able to find a place that can repair the board. Just take lots of pictures for reference.

http://www.appliancepartspros.c...wp8302994-ap6012659.html
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET