Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
New Topic Post Reply
Frigidaire Affinity Washer Will Not Start or Display Diagnostic Codes
Options
Go to last post Go to first unread
Model: FAFW3801LW2 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
pwmin  
#1 Posted : Tuesday, August 5, 2014 7:40:09 PM(UTC)
Quote
pwmin

Rank: Member

Groups: Registered
Joined: 8/5/2014(UTC)
Posts: 4
I tried using my washer tonight and the only thing any button will do is change the temperature. I cannot get it to start or enter diagnostic mode by pushing start and cancel at the same time for 5+ seconds. I've tried unplugging it for 10 minutes also and resetting to factory settings and no progress. The only thing different it will do is when I have it on Rinse & Spin, all the temperature lights will blink.

Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
pwmin  
#2 Posted : Wednesday, August 6, 2014 7:43:20 AM(UTC)
Quote
pwmin

Rank: Member

Groups: Registered
Joined: 8/5/2014(UTC)
Posts: 4
Now that I unplugged it overnight, it's working again. I had also been having issues of the temperature lights flashing while running. I thought it was because of having too much in the washer, but it will still do it when it's not full.
Back to top
pwmin  
#3 Posted : Wednesday, August 6, 2014 8:40:59 AM(UTC)
Quote
pwmin

Rank: Member

Groups: Registered
Joined: 8/5/2014(UTC)
Posts: 4
I got one load done and now it's doing the same thing again.
Back to top
bxtr97  
#4 Posted : Thursday, August 7, 2014 12:20:00 PM(UTC)
Quote
bxtr97

Rank: Member

Groups: Registered
Joined: 8/7/2014(UTC)
Posts: 1
I am having the exact same problem been happening for a couple months off and on. Did you find a solution? I'll let you know if i figure it out also.
Back to top
pwmin  
#5 Posted : Friday, August 8, 2014 1:23:33 PM(UTC)
Quote
pwmin

Rank: Member

Groups: Registered
Joined: 8/5/2014(UTC)
Posts: 4
I haven't figured it out yet. If I want to use it, I have to unplug it for an hour between uses. Thanks, I'll post here if I figure it out. I'm guessing it's the control panel, but I don't know for sure.
Back to top
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET