Rank: Member
Groups: Registered
Joined: 11/15/2012(UTC)
Posts: 3
Thanks: 1 times
|
Everything on the microwave works except it doesnt heat anything. Light, timer, exhaust vent. The wave hums, and there is a slight ozone smell.
I tried to boil a cup of water....nada!
Is there a troubleshooting guide available?
Thanks in advance!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hello, Unplug the microwave. Remove the top grille and open the control panel. Disconnect the wires connected to the high voltage transformer primary winding. Attach the voltmeter probes to these wires and plug the microwave back. Start the microwave with the door closed and check the voltage. If the reading is about 120 VAC, replace the magnetron. If the reading is incorrect, replace the smart board. - The magnetron Part number: WB27X10017
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
